configure wireless ports interface client-history size
configure wireless ports [<portlist> | all] interface [1 | 2]
client-history size <integer>
Description
Use this command to configure the client history size.
Syntax Description
portlist
all
interface
integer
Default
128.
Usage Guidelines
None.
Example
The following example sets the client-history table for ports 1:1-1:20 and interface 2 to 100 entries:
configure wireless ports 1:1-1:30 interface 2 client-history size 100
History
This command was first available in ExtremeWare 6.2a and added to the "i" series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
ExtremeWare Software 7.3.0 Command Reference Guide
Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
Specifies all ports.
Specifies an interface: 1 or 2.
Specifies the size of the client-history table in terms of the number of entries.
Valid values are between 1 and 128 entries.
configure wireless ports interface client-history size
2023
Need help?
Do you have a question about the ExtremeWare and is the answer not in the manual?