Unconfigure Sonet Ports - Extreme Networks ExtremeWare Command Reference Manual

unconfigure sonet ports

unconfigure sonet ports <portlist>
Description
Resets the configuration parameters of the specified SONET port to their default values.
Syntax Description
portlist
Default
N/A.
Usage Guidelines
The following are the SONET port default values:
clock setting
Framing
signal label
threshold signal degrade
threshold signal fail
trace path
trace section
Example
The following command resets the configuration parameters for port 1, slot 8 of a BlackDiamond switch
to the default values:
unconfigure sonet ports 8:1
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.5b20.
Platform Availability
This command is available on the BlackDiamond switch only.
ExtremeWare Software 7.3.0 Command Reference Guide
Specifies the port number(s).
internal
sonet
auto, where the value of the signal Label field is automatically set based on
standard conventions for the given payload type.
-6
10
-5
10
null
1 for SONET, null for SDH
unconfigure sonet ports
1693