Abort Diagnostics Cable - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

High Density Gigabit Ethernet Commands

abort diagnostics cable

Discontinues the running of the Cable Diagnostics Module (CDM) to obtain cable diagnostics values for

selected physical ports of the system.

Syntax Description

This command has no syntax or values.

Usage Guidelines

This command aborts the running of cable diagnostics for selected physical ports of the system. To

enable auto-diagnostics collection for selected ports, use the

enable diagnostics cable

To disable auto-diagnostics collection for selected ports, use the

disable diagnostics cable

command. To set the starting time for auto-diagnostics collection for selected ports, use the

command. To manually run cable diagnostics, use the

diagnostics cable

run diagnostics cable

To view cable diagnostics data, use the

show diagnostics cable

The following command disables automatic running of cable diagnostics for all ports.

disable diagnostics cable port all

This command was first available in ExtremeWare 7.3.0.

Platform Availability

This command is available on

series I/O modules only.

ExtremeWare Software 7.3.0 Command Reference Guide

Extremeware 7.3.0