Configure Ospf Area Add Range - Extreme Networks ExtremeWare Command Reference Manual

IGP Commands

configure ospf area add range

configure ospf area <area identifier> add range <ipaddress> <mask>
[advertise | noadvertise] {type-3 | type-7}
Description
Configures a range of IP addresses in an OSPF area to be aggregated.
Syntax Description
area identifier
ipaddress
mask
advertise
noadvertise
type-3
type-7
Default
N/A.
Usage Guidelines
If advertised, the aggregated IP range is exported as a single LSA by the ABR.
Example
The following command is used to summarize a certain range of IP addresses within an area and export
them out as a single address:
configure ospf area 1.2.3.4 add range 10.1.2.0/24 advertise type-3
History
This command was available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
1294
Specifies an OSPF area.
Specifies an IP address
Specifies a subnet mask.
Specifies to advertise the aggregated range of IP addresses.
Specifies not to advertise the aggregated range of IP addresses.
Specifies type 3 LSA, summary LSA.
Specifies type 7 LSA, NSSA external LSA.
ExtremeWare Software 7.3.0 Command Reference Guide