Extreme Networks ExtremeWare Command Reference Manual page 1755

configure mpls
maintained. If an LDP PDU is not received within the specified session ,
keep-alive <interval_time>
the corresponding LDP session is torn down.
The minimum and maximum values for both the and
hello <hold_time> <interval_time>
are 6 and 65,534, respectively.
keep-alive <hold_time> <interval_time>
This command can only be executed when MPLS is disabled.
Example
The following command configures LDP session hello hold time to 30 seconds and the interval time to 5
seconds:
configure mpls ldp hello 30 5
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.8b12.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the BlackDiamond switch only.
ExtremeWare Software 7.3.0 Command Reference Guide 1755