Disable Igmp - Extreme Networks ExtremeWare Command Reference Manual

IP Multicast Commands

disable igmp

disable igmp {vlan <vlan name>}
Description
Disables IGMP on a router interface. If no VLAN is specified, IGMP is disabled on all router interfaces.
Syntax Description
vlan name Specifies a VLAN name.
Default
Enabled.
Usage Guidelines
IGMP is a protocol used by an IP host to register its IP multicast group membership with a router.
Periodically, the router queries the multicast group to see if the group is still in use. If the group is still
active, hosts respond to the query, and group registration is maintained.
IGMP is enabled by default on the switch. However, the switch can be configured to disable the
generation and processing of IGMP packets. IGMP should be enabled when the switch is configured to
perform IP unicast or IP multicast routing. IGMP must be enabled if the switch is configured for
DVMRP.
Example
The following command disables IGMP on VLAN accounting:
disable igmp vlan accounting
History
This command was available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
1522 ExtremeWare Software 7.3.0 Command Reference Guide