Configure Ipxrip Add Vlan - Extreme Networks ExtremeWare Command Reference Manual

configure ipxrip add vlan

configure ipxrip add vlan [<vlan name> | all]
Description
Configures one or all IPX VLANs to run IPX/RIP.
Syntax Description
vlan name
all
Default
IPX/RIP is enabled by default when you configure the IPX VLAN.
Usage Guidelines
IPX/RIP is automatically enabled when a NetID is assigned to the VLAN.
Example
The following command configures IPX VLAN
configure ipxrip add vlan backbone
History
This command was introduced in ExtremeWare 4.0.
Platform Availability
This command is available on the all "i" series systems.
ExtremeWare Software 7.3.0 Command Reference Guide
Specifies a VLAN name.
Specifies all VLANs.
backbone
to run IPX/RP:
configure ipxrip add vlan
1559