Extreme Networks ExtremeWare Command Reference Manual page 2080

Wireless Commands
Fields
RSS
Example
The following command displays information about client MAC address 00:09:5B:A1:1F:8F on port 1:
show wireless ports 1 interface 1 clients 00:09:5B:A1:1F:8F detail
The output of the command is similar to:
Client MAC : 00:09:5B:A1:1F:8F
Wireless Port : 1:1
Current State : FORWARD
Last State Change : 4:42:39
Authentication Type : PSK
Encryption Type : AES
ESS ID : fz-wpa-psk-aes
Client VLAN : SKSPVlan
Client Priority : 0
Received Signal Strength : 195
TX Frames : 17067
RX Frames : 34228
TX Bytes : 1712753
RX Bytes : 3857802
History
This command was first available in ExtremeWare 6.2a and added to the "i" series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
2080
Description
Received signal strength
ExtremeWare Software 7.3.0 Command Reference Guide