Configure Debug-Trace Dvmrp-Timer - Extreme Networks ExtremeWare Command Reference Manual

Troubleshooting Commands

configure debug-trace dvmrp-timer

configure debug-trace dvmrp-timer <debug level> vlan <vlan name>
Description
This command records debug information to the syslog.
Syntax Description
debug level Specifies a debug level:
0 —
1 —
2 —
3 —
4 —
5 —
vlan name Specifies a VLAN name.
Default
The default level is 0.
Usage Guidelines
The range is 0 to 5. Higher levels record more verbose messages. Higher levels also record
debug level
the messages recorded at lower levels.
Example
The following command sets the reporting level for DVMRP timer errors to 3:
configure debug-trace dvmrp-timer 3 vlan v49
Following is the log output at this level:
<INFO:SYST> serial admin: configure debug-trace dvmrp-timer 3 v49
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
2148
Records error messages.
Records warnings.
Records verbose warnings.
Displays a dump of each packet.
No additional information recorded.
No additional information recorded.
ExtremeWare Software 7.3.0 Command Reference Guide