Configure Isis External-Filter - Extreme Networks ExtremeWare Command Reference Manual

configure isis external-filter

configure isis [level-2 | area <isis area identifier>] external-filter
[<access profile> | none]
Description
Configures an access profile to filter routes being redistributed in to the level 1 area or level 2
subdomain.
Syntax Description
isis area identifier
access profile
Default
By default no access profile is present.
Usage Guidelines
The filter is applied on the routes from all the non-IS-IS origins. When an access profile is not
configured, none of the routes are filtered.
Example
The following command configures an external filter for a level 1 area with the access profile ap:
configure isis area a1 external-filter ap
History
This command was first available in ExtremeWare v6.1.8 IS-IS tech release and subsequently
incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.3.0 Command Reference Guide
Specifies an area identifier.
Specifies an access profile name.
configure isis external-filter
1269