Configure Multilink Delete - Extreme Networks ExtremeWare Command Reference Manual

configure multilink delete

configure multilink <groupname> delete ports <portlist>
Description
Deletes ports from a multilink group.
Syntax Description
groupname
portlist
Default
N/A.
Usage Guidelines
Use this command to delete ports from a previously created multilink group.
Example
The following command deletes a port from the multilink group example_1:
configure example_1 delete ports 2:3
History
This command was first available in ExtremeWare v6.1.5w2.01WAN technology release.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the Alpine 3800 series platform, when a WAN module is installed.
ExtremeWare Software 7.3.0 Command Reference Guide
Specifies a previously created multilink group.
A list of ports.
configure multilink delete
1697