Extreme Networks ExtremeWare Command Reference Manual page 2174

Troubleshooting Commands
<DBUG:MPLS> mplsevnt.c 584: LDP DU LSP ID RELEASE: 0x00002355
<DBUG:MPLS> mplsevnt.c 584: LDP DU LSP ID RELEASE: 0x00002352
<DBUG:MPLS> mplsevnt.c 584: LDP DU LSP ID RELEASE: 0x0000236D
<DBUG:MPLS> mplsevnt.c 584: LDP DU LSP ID RELEASE: 0x00002350
<DBUG:MPLS> mpls_rdb.c 1060: du_recognize_new_fec: ifIndex=3, destIp=17.17.17.1/32,
nHop=10.0.2.2
<DBUG:MPLS> mpls_rdb.c 578: mpls_rdb_callback: add route to 17.17.17.1/32 nhop
10.0.2.2 watch 0 orig=33
<DBUG:MPLS> mpls_rdb.c 1060: du_recognize_new_fec: ifIndex=3,
destIp=192.168.100.12/32, nHop=10.0.2.2
<DBUG:MPLS> mpls_rdb.c 578: mpls_rdb_callback: add route to 192.168.100.12/32 nhop
10.0.2.2 watch 0 orig=33
<INFO:MPLS> mpls_gpp.c 1617: Create ILM for FecIp=10.3.1.1, NhlfeIx=1324,
EndptIx=1332, InLabel=0x11, OutLabel=
<DBUG:MPLS> mpls_gpp.c 763: MPLS Add ILM
<DBUG:MPLS> mpls_lpe.c 1302: Bind LSP Req Label 0x00000011 to endpt 10.3.1.1:32 Type 1
<INFO:MPLS> mplsevnt.c 369: LMS Notify (0x8d3d1f2c): LSP SUCCESSFUL FEC:10.3.1.1:32
LSPID:9046 DNS LABEL:3
<DBUG:MPLS> mpls_lsp_bind.c 1783: Binded LSP to endpt 10.3.1.1:32 nhop 10.0.1.2 Label
0x00000003
<DBUG:MPLS> mpls_gpp.c 1002: MPLS Add NHLFE
History
This command was first available in an ExtremeWare IP Technology Services Release based on
ExtremeWare v6.1.8b12.
Platform Availability
This command is available on the MPLS module.
2174 ExtremeWare Software 7.3.0 Command Reference Guide