Extreme Networks ExtremeWare Command Reference Manual page 1828

Hide thumbs Also See for ExtremeWare:

Table of Contents

MPLS Commands

keyword optionally specifies the maximum TTL value in the MPLS echo request packet. The

TTL value is decremented along the path at each LSR. When the TTL value reaches zero, the packet is

not forwarded but is redirected to the control plane for additional processing. When the TTL value

specified by the

parameter is exceeded, the mplstrace command ends. The valid

max_ttl_value

range is one to 30 with a default value of 30.

max_ttl_value

This command was first available in an ExtremeWare 7.3.

Platform Availability

This command is available on the BlackDiamond switch.

ExtremeWare Software 7.3.0 Command Reference Guide

Extremeware 7.3.0