configure igmp snooping flood-list
Example
Given access profile access1 created as follows:
create access-profile access1 type ipaddress
configure access-profile access1 add ipaddress 224.1.0.1/32
The following command configures the multicast data stream specified in access1 for slow path flooding:
configure igmp snooping flood-list access1
The following command specifies that no access profile is to be used, this effectively disabling slow path
flooding:
configure igmp snooping flood-list none
History
This command was first available in ExtremeWare 6.2.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.3.0 Command Reference Guide
1501