High Density Gigabit Ethernet Commands
Example
The following command configures the ingress QoS profile parameters of ingress QoS profile IQP1 for
slot 1, port 1:
configure qosprofile ingress iqp1 committed-rate 250 m peak-rate 1000 m red-threshold
100 % maxbuf 100 % ports 1:1
History
This command was first available in ExtremeWare 7.1.
Platform Availability
"3"
This command is available on
series I/O modules only.
1866
ExtremeWare Software 7.3.0 Command Reference Guide