Show Mpls Health-Check Mplsping - Extreme Networks ExtremeWare Command Reference Manual

show mpls health-check mplsping

show mpls health-check mplsping {detail | <ipaddress> | prefix
<ipaddress/masklength> |
Description
Displays the configuration and status for MPLS tunnel LSP health-checks.
Syntax Description
detail
ipaddress
ipaddress/masklength
host_name
lsp_name
Default
N/A.
Usage Guidelines
This command displays the configuration and status for MPLS tunnel LSP health-checks. If no optional
keywords are specified, information is displayed in tabular format for all configured MPLS tunnel LSP
health-checks. Health-check information displayed includes the type of health-check, current status, and
relevant configuration parameters. If the optional
information is displayed in a comprehensive detail format. The detail format includes total state
transition count from up to down and down to up, time of last failure, total up time, and total down
time, and error code (if applicable). Optionally, an
parameter can be specified to display specific mplsping information. This information is
lsp_name
always displayed in the detailed format.
Example
None.
History
This command was first available in an ExtremeWare 7.3.0.
Platform Availability
This command is available on the BlackDiamond switch.
ExtremeWare Software 7.3.0 Command Reference Guide
<host_name> | lsp <lsp_name>}
Displays the health-check information in comprehensive detail format.
Display specific mplsping information for the specified address.
Display specific mplsping information for the specified address.
Display specific mplsping information for the specified host. Must be able to be
resolved to an IP address.
Specifies the LSP to trace.
detail
ipaddress
show mpls health-check mplsping
keyword is specified, the health-check
,
ipaddress/masklength
, , or
host_name
1979