Configure Mpls Vpls Delete Peer - Extreme Networks ExtremeWare Command Reference Manual

configure mpls vpls delete peer

config mpls vpls <vpls_name> delete peer [<ipaddress> {vcid <vcid>} |
<host_name> {vcid <vcid>} | all]
Description
Deletes a VPLS peer from the specified vpls_name.
Syntax Description
vpls_name
ipaddress
host_name
vcid
all
Default
N/A.
Usage Guidelines
This command deletes a VPLS peer from the specified vpls_name. When the VPLS peer is deleted, VPN
connectivity to the VPLS peer is terminated. The optional
qualify a specific core-to-spoke Martini VC-LSP. The all keyword may be used to indicate that all VPLS
peers be deleted.
Example
Need example
History
This command was first available in an ExtremeWare 7.3.
Platform Availability
This command is available on the BlackDiamond switch.
ExtremeWare Software 7.3.0 Command Reference Guide
Identifies the VPLS within the switch (character string)
Specifies the IP address for the peer node that is the endpoint of the VC-LSP
Specifices the peer host name.
Qualifies a specific core-to-spoke Martini VC-LSP.
Deletes all VPLS peers.
configure mpls vpls delete peer
keyword may be specified to fully
vcid
1821