Configure Dvmrp Vlan Cost - Extreme Networks ExtremeWare Command Reference Manual

IP Multicast Commands

configure dvmrp vlan cost

configure dvmrp vlan [<vlan name> | all] cost <cost>
Description
Configures the cost (metric) of the interface.
Syntax Description
vlan name
all
cost
Default
The default setting is 1.
Usage Guidelines
The cost range is 1 - 32.
Example
The following command configures the cost (metric) of the interface on the VLAN accounting:
configure dvmrp vlan accounting cost 5
History
This command was available in ExtremeWare 4.0.
Platform Availability
This command is available on all platforms.
1488
Specifies a VLAN name.
Specifies all VLANs.
Specifies a cost metric.
ExtremeWare Software 7.3.0 Command Reference Guide