Configure Debug-Trace Pim-Hello - Extreme Networks ExtremeWare Command Reference Manual

Troubleshooting Commands

configure debug-trace pim-hello

configure debug-trace pim-hello <debug level> vlan <vlan name>
Description
This command records debug information to the syslog.
Syntax Description
debug level Specifies a debug level:
0 —
1 —
2 —
3 —
4 —
5 —
vlan name Specifies a VLAN name.
Default
The default level is 0.
Usage Guidelines
The range is 0 to 5. Higher levels record more verbose messages. Higher levels also record
debug level
the messages recorded at lower levels.
This command traces all PIM hello messages coming into a VLAN. Use this command if switches
connected to a common network have problems establishing or maintaining normal neighbor
relationships.
Example
The following command sets the reporting level for PIM hello errors to 3:
configure debug-trace pim-hello 3
Following is the log output at this level:
<INFO:SYST> msm-a-console admin: configure debug-trace pim-hello 3 vlan all
<INFO:SYST> Log cleared
<INFO:SYST> msm-a-console admin: clear log static
<DBUG:PIM> PIM: Receiving Hello pkt of len 18 from src 15.2.1.2 thro 15.2.1.1
<DBUG:PIM> PIM: Receiving Hello pkt of len 18 from src 15.1.4.2 thro 15.1.4.1
<DBUG:PIM> PIM: Xmitting Hello pkt of len 18 from src 15.2.1.1 to 224.0.0.13
<DBUG:PIM> PIM: Xmitting Hello pkt of len 18 from src 15.1.4.1 to 224.0.0.13
<DBUG:PIM> PIM: Receiving Hello pkt of len 18 from src 15.1.6.3 thro 15.1.6.1
<DBUG:PIM> PIM: Xmitting Hello pkt of len 18 from src 15.1.6.1 to 224.0.0.13
<INFO:SYST> msm-a-console admin: configure debug-trace pim-hello 3 vlan all
<INFO:SYST> Log cleared
<INFO:SYST> msm-a-console admin: clear log static
2180
Records error messages.
Records warnings.
Records verbose warnings.
Displays a dump of each packet.
No additional information recorded.
No additional information recorded.
ExtremeWare Software 7.3.0 Command Reference Guide