Configure Ipxsap Vlan Gns-Delay - Extreme Networks ExtremeWare Command Reference Manual

configure ipxsap vlan gns-delay

configure ipxsap vlan <vlan name> gns-delay <msec>
Description
Configures the amount of time the switch waits before answering a GNS request.
Syntax Description
vlan name
msec
Default
The switch answers a GNS request as soon as possible (0 milliseconds).
Usage Guidelines
If no VLAN is specified, all VLANs are configured to run IPX/SAP routing. IPX/SAP routing is enabled
by default when the IPX VLAN is configured.
Example
The following command sets a GNS delay time of
configure ipxsap vlan accounting gns-delay 20
History
This command was introduced in ExtremeWare 4.0.
Platform Availability
This command is available on the all "i" series systems.
ExtremeWare Software 7.3.0 Command Reference Guide
Specifies a VLAN name.
Specifies a delay in milliseconds.
milliseconds on VLAN
20
configure ipxsap vlan gns-delay
:
accounting
1577