Unconfigure Rip - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

unconfigure rip

unconfigure rip {vlan <vlan name>}

Resets all RIP parameters to the default VLAN.

Syntax Description

Specifies a VLAN name.

Usage Guidelines

Does not change the enable/disable state of the RIP settings.

The following command deletes RIP configuration from the VLAN finance:

unconfigure rip finance

This command was available in ExtremeWare 2.0.

Platform Availability

This command is available on all platforms.

ExtremeWare Software 7.3.0 Command Reference Guide

Extremeware 7.3.0