Configure Dvmrp Vlan Import-Filter - Extreme Networks ExtremeWare Command Reference Manual

IP Multicast Commands

configure dvmrp vlan import-filter

configure dvmrp vlan [<vlan name> | all] import-filter [<access profile> |
none]
Description
Configures DVMRP to filter certain routes received from its neighbor, and uses an access profile to
determine which DVMRP routes are accepted as valid routes.
Syntax Description
vlan name
all
access profile
none
Default
None.
Usage Guidelines
Use this command to filter out certain routes when accepting routes from its neighbors. The filtered
routes are specified in an access profile.
Example
The following command configures DVMRP to use the nosales access profile to determine which
DVMRP routes are to accept:
configure dvmrp vlan accounting import-filter nosales
History
This command was first available in ExtremeWare 4.0.
Platform Availability
This command is available on all platforms.
1490
Specifies a VLAN name.
Specifies all VLANs.
Specifies an access profile name.
Deletes any associated filter.
ExtremeWare Software 7.3.0 Command Reference Guide