Enable Bgp Neighbor - Extreme Networks ExtremeWare Command Reference Manual

BGP Commands

enable bgp neighbor

enable bgp neighbor [<ip address> | all]
Description
Enables the BGP session. The neighbor must be created before the BGP neighbor session can be enabled.
Syntax Description
ip address
all
Default
Disabled.
Usage Guidelines
To create a new neighbor and add it to a BGP peer group, use the following command:
create bgp neighbor <ip address> peer-group <peer group> {multi-hop}
Example
The following command enables the BGP neighbor session:
enable bgp neighbor 192.168.1.17
History
This command was available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
1468
Specifies an IP address.
Specifies all neighbors.
ExtremeWare Software 7.3.0 Command Reference Guide