Configure Wireless Ports Antenna-Location - Extreme Networks ExtremeWare Command Reference Manual

configure wireless ports antenna-location

configure wireless ports [<portlist> | all] antenna-location <indoor |
outdoor>
Description
Sets the Altitude 300-2d detachable antenna for indoor or outdoor use.
Syntax Description
portlist
all
indoor
outdoor
Default
Indoor.
Usage Guidelines
The detachable Altitude 300-2d antenna is compatible with the Alpine 3800 switches. Use this command
to configure the antenna type as indoor or outdoor and to comply with regulatory requirements.
Example
The following example configures all ports on the Altitude 300 for indoor use.
configure wireless ports all antenna-location indoor
History
This command was first available in ExtremeWare 6.2a and added to the "i" series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
ExtremeWare Software 7.3.0 Command Reference Guide
Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
Specifies all ports.
Specifies that the antenna is for indoor use. The default value is indoor.
Specifies that the antenna is for outdoor use.
configure wireless ports antenna-location
2007