Extreme Networks ExtremeWare Command Reference Manual page 1358

IGP Commands
routing applications. Use 0 if you do not have specific requirements for using a tag. The tag value in
this instance has no relationship with 802.1Q VLAN tagging.
The same cost, type, and tag values can be inserted for all the export routes, or route maps can be used
for selective insertion. When a route map is associated with the export command, the route map is
applied on every exported route. The exported routes can also be filtered using route maps.
Example
The following command enables OSPF to export BGP-related routes using LSAs to other OSPF routers:
enable ospf export bgp cost 1 ase-type-1 tag 0
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
1358 ExtremeWare Software 7.3.0 Command Reference Guide