Extreme Networks ExtremeWare Command Reference Manual page 2195

Hide thumbs Also See for ExtremeWare:

Table of Contents

configure debug-trace transceiver-test

07/09/2003 15:09:15.00 <Info:TRXDIAG> trxdiag: TWISTER test on BPLNE returns pass

07/09/2003 15:09:15.00 <Info:TRXDIAG> trxdiag: QUAKE test on BPLNE returns pass

The following command disables debug-trace for transceiver testing:

configure debug-trace transceiver-test 0

This command was first available in ExtremeWare 6.2.2b108.

This command was not supported in ExtremeWare 7.0.

This command is supported in ExtremeWare 7.1.0.

Platform Availability

This command is available on modular switches only.

ExtremeWare Software 7.3.0 Command Reference Guide

Extremeware 7.3.0