Show Qosprofile Ingress - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

show qosprofile ingress

show qosprofile ingress {<Ingress QOS profile>} {<portlist>}

Displays ingress QoS profiles.

Syntax Description

Ingress QoS profile

Usage Guidelines

If you do not specify an ingress QoS profile, all ingress QoS profiles for the specified ports are

The units displayed are the same units that you used when you configured the ingress QoS profile.

The following command displays ingress QoS profile information for all ingress QoS profiles on slot 1:

show qosprofile ingress 1:*

Following is sample output from this command:

=============================================================

This command was first available in ExtremeWare 7.1.

ExtremeWare Software 7.3.0 Command Reference Guide

Specifies an ingress QoS profile: IQP1 through IQP8.

Specifies one or more slots and ports. May be in the form 2:*, 2:5, 2:6-2:8.

Committed-Rate

show qosprofile ingress

Extremeware 7.3.0