Mrinfo - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

IP Multicast Commands

mrinfo

mrinfo <ip address> {from <ip address>} {timeout <seconds>}

Initiates a request to get multicast information from a router.

Syntax Description

• from—outgoing interface

• timeout—three seconds

Usage Guidelines

This command queries a multicast router for information useful for tracing and troubleshooting. The

command returns the following information:

• code version

• system multicast information

• interface information

— interface IP address

— interface multicast capabilities

— metric configured on the interface

— threshold configured on the interface

— count and IP address of the neighbors discovered on the interface

The following command queries the router at 10.10.34.14:

mrinfo 10.10.34.14

This command was first available in ExtremeWare 7.1.0.

Platform Availability

This command is available on all platforms.

Specifies an IP address. The first <ip address> parameter specifies the

unicast IP address of the router to query.

Specifies the unicast address of an interface in the system to use as the

source address in the request.

Specifies the time to wait before indicating a failure.

ExtremeWare Software 7.3.0 Command Reference Guide

Extremeware 7.3.0