Disable Wanqos - Extreme Networks ExtremeWare Command Reference Manual

disable wanqos

disable wanqos {ports <portlist> | multilink <groupname>}
Description
Disables WAN QoS for T1 and E1 ports.
Syntax Description
portlist
groupname
Default
WAN QoS is disabled by default.
Usage Guidelines
This command disables WAN QoS for T1 and E1 links. There is no equivalent command for T3 links.
Example
The following command disables WAN QoS on ports 1:1 and 1:3:
disable wanqos ports 1:1,1:3
History
This command was first available in ExtremeWare 7.1.0.
Platform Availability
This command is available on the Alpine 3800 series platform, when a WAN module is installed.
ExtremeWare Software 7.3.0 Command Reference Guide
A list of ports.
A multilink group name.
disable wanqos
1727