Show Wireless Ap-Scan Results Mac_Address - Extreme Networks ExtremeWare Command Reference Manual

show wireless ap-scan results mac_address

show wireless ap-scan results mac_address
show wireless ap-scan results <mac_address>
Description
Displays information about the access point (AP) MAC-address that is entered.
Syntax Description
mac_address Specifies the MAC-address.
Default
N/A.
Usage Guidelines
None.
Example
The following command displays information about the AP MAC-address entered:
show wireless ap-scan results 00:00:00:00:00:a
The results of the command are similar to:
History
This command was first available in ExtremeWare 6.2a and added to the "i" series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
ExtremeWare Software 7.3.0 Command Reference Guide 2071