Enable Ospf Originate-Router-Id - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

IGP Commands

enable ospf originate-router-id

Enables distribution of a route for the OSPF router ID in the router LSA.

Syntax Description

This command has no arguments or variables.

Usage Guidelines

When this function is enabled, OSPF includes a link with the router ID IP address and a mask of

255.255.255.255 in the router LSA. The link type is stub and the metric is 0.

When disabled, OSPF does not include a link with the router ID IP address in the router LSA

The following command enables the distribution of a route for the OSPF router ID in the router LSA:

enable ospf originate-router-id

This command was first available in an ExtremeWare IP Technology Services Release based on

Platform Availability

This command is available on the BlackDiamond switch only.

ExtremeWare Software 7.3.0 Command Reference Guide

Extremeware 7.3.0