Configure Ipxsap Vlan Export-Filter - Extreme Networks ExtremeWare Command Reference Manual

IPX Commands

configure ipxsap vlan export-filter

configure ipxsap vlan [<vlan name> | all] export-filter [none |
access_profile]
Description
Assigns an export route filter to an ingress VLAN.
Syntax Description
vlan name
all
none
access_profile
Default
N/A.
Usage Guidelines
Only the network ID matching the export filter will be added to the IPX route table.
Example
The following command assigns an export route filter to ingress VLAN
configure ipxsap vlan accounting export-filter none
History
This command was introduced in ExtremeWare 4.0;
Platform Availability
This command is available on the all "i" series systems.
1572
Specifies a VLAN name.
Specifies all VLANs.
Specifies no export filters
Specifies an access profile name.
access-profile
:
accounting
s modified in version 6.1.5b20.
ExtremeWare Software 7.3.0 Command Reference Guide