Show Multilink - Extreme Networks ExtremeWare Command Reference Manual
Hide thumbs
Also See for ExtremeWare:
- Command reference manual (2620 pages) ,
- Command reference manual (2546 pages) ,
- Command reference manual (1598 pages)
Table of Contents
Advertisement
T1, E1, and T3 WAN Commands
show multilink
show multilink <groupname>
Description
Displays the configuration of the multilink group.
Syntax Description
groupname
Specifies a previously created multilink group.
Default
N/A.
Usage Guidelines
Use this command to display the ports in a multilink group, and the PPP configuration of the group.
Example
The following command displays the configuration for the multilink group m_remote1:
show multilink m_remote1
History
This command was first available in ExtremeWare v6.1.5w2.01WAN technology release.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the Alpine 3800 series platform, when a WAN module is installed.
1736
ExtremeWare Software 7.3.0 Command Reference Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the ExtremeWare and is the answer not in the manual?