Use Image - Extreme Networks ExtremeWare Command Reference Manual

use image

use image [primary | secondary] {slot <slot>}
Description
Configures the switch to use a saved image on the next reboot.
Syntax Description
primary
secondary
slot
Default
Primary.
Usage Guidelines
None.
Example
The following command configures the switch to use the primary image on the next reboot:
use image primary
History
This command was first available in ExtremeWare 2.0.
Support for the
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.3.0 Command Reference Guide
Specifies the primary saved software image.
Specifies the secondary saved software image.
Specifies a saved image in the module in the specified slot.
parameter was introduced in ExtremeWare 7.0.0.
<slot>
use image
2131