Extreme Networks ExtremeWare Command Reference Manual page 1838

Hide thumbs Also See for ExtremeWare:

Table of Contents

MPLS Commands

• Counts of packets and bytes that have been transmitted with the outgoing label

This command also displays information from the Incoming Label Map (ILM) for RSVP-TE LSPs.

The following command displays the summary information from the Incoming Label Map:

show mpls label summary

This command was first available in an ExtremeWare IP Technology Services Release based on

This command was subsequently incorporated into ExtremeWare 7.0.0.

Platform Availability

This command is available on the BlackDiamond switch only.

ExtremeWare Software 7.3.0 Command Reference Guide

Extremeware 7.3.0