Viewing Device Monitor Alarm Status - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual

Configuring Secure Access Devices Guide
Related
Documentation

Viewing Device Monitor Alarm Status

Related
Documentation
316
Table 94: Device Status Information (continued)
Column Description
License Inventory Displays the inventory status for software on the device:
Status
In Sync—The inventory information in the NSM database is synchronized
with the licenses on the device.
Out Of Sync—The inventory information in the NSM database is not
synchronized with the licenses on the device.
N/A—The connected device is a ScreenOS or IDP device, or the device is
not connected and imported.
First Connect The first time the security device connected to the NSM Device Server.
Latest Connect The last time the security device connected to the NSM Device Server.
Latest Disconnect The last time the security device disconnected from the NSM Device Server.
Viewing Device Monitor Alarm Status on page 316
Monitoring the Secure Access as an SNMP Agent (NSM Procedure) on page 317
Alarms refresh automatically through periodic polling.
To view the Alarm status and time:
From Device Monitor, right-click the device row entry and select the View Alarm
1.
option.
The device Alarm Status dialog box displays the alarm list and polling time for the
device.
To retrieve the current alarm status in the device, click the Refresh button.
2.
The poll time is derived from the device server time.
Monitoring the Secure Access as an SNMP Agent (NSM Procedure) on page 317
Viewing Device Status on page 313
Copyright © 2010, Juniper Networks, Inc.