Input Assign - Yamaha QX5 Owner's Manual

MIDI 1
These settings determine what the QX5 will record, and how it will be played back. To enter this mode, double-click
the
There are 7 jobs in this mode.
1. INPUT ASSIGN
41
TRACK} switch.
Multi-channel
recording
(Press twice)
TRACK. [1>INPUT ASSIGN
Read | 123456789 1011 1213 141516
SHIFT
eL a co
1 > INPUT ASSIGN 2 > OUTPUT ASSIGN
7 > SYS.EXCLUSIVE
4 > AFTERTOUCH
5 > PITCH BEND
3> VELOCITY
6 > CONTROL CHNG
1>INPUT ASSIGN
123456789 1011 12 13 1415 16
Recorded MIDI Channel, 1-16
When set as shown above, each incoming MIDI channel will be recorded on its
original channel. If you can change the output channel of your MIDI keyboard, it
is easiest to leave Input Assign set as above, and switch output channels before
recording each part.
1>INPUT ASSIGN
7. . .56789 1011 12 13 1415 16
When set as shown above, incoming messages on channel 1 will be re-channelized
to channel 7. Messages on channels 2-4 will be ignored, and messages on channels
5-16 will be accepted on their original channel.
When using the QX5 with more than one tone generator, the usual method is to
set each tone generator to a different reception channel, so it can play a different
part. Obviously, each part must be on a different MIDI channel. There are three
ways to do this.
9
=