Handling The Digital Audio Input Signal; Input Setting Enee; Handling The Clock Signal - Yamaha DEQ5E Operation Manual

3. Handling the digital audio input signal
(1) Input setting
The unit is provided with a digital system input terminal, except for XLR type analog I/O terminal. When
handling signals from this input terminal, change the input system to the appropriate setting on the DEQ5 (or
personal computer, etc.) side.
This is done in "SYSTEM SET UP" in the "UTILITY" menu. (*)
(2) Handling the clock signal
When carrying out DEQSE processing by inputting the digital audio signal to the unit, clock setting is required in
the "UTILITY" menu.
It is possible to operate the DEQSE on the clock signal extracted from the digital audio signal.
However, if all signal transmission and reception is carried out digitally (using the unit as part of the digital audio
system), it is better to operate the unit with the clock signal of your digital audio system's main control unit. Input
this clock signal into the "WORD CLK IN" terminal on the unit's rear panel.
[Example] When the digital mixer is the center of the system
, 9 Audio signals
ii
, @ Distributor
š , @ Clock signal output
_ ¿+ 9 Audio signals
Digital MTR
Digital mixer
Word clock