Specifications（総合仕様; Analog Input Characteristics; Analog Output Characteristics - Yamaha SB168-ES Service Manual

SB168-ES
SPECIFICATIONS（総合仕様）
General Specification（一般仕様）
Power Requirements
Dimensions
Net Weight
Temperature Range
AC Cable Length
Accessories
Input/Output Characteristics（入出力特性）

Analog Input Characteristics

Input
GAIN
Terminals
-62 dB
INPUT 1–16
+10 dB
*1. XLR-3-31 type connectors are balanced. (1=GND, 2=HOT, 3=COLD)
* In these specifications, when dBu represents a specific voltage, 0 dBu is referenced to 0.775 Vrms.
* AD converters are 24-bit linear, 128-times oversampling.

Analog Output Characteristics

Output Actual Source
Terminals Impedance
OUTPUT 1–8 75 Ω
*1. XLR-3-32 type connectors are balanced. (1=GND, 2=HOT, 3=COLD)
* In these specifications, when dBu represents a specific voltage, 0 dBu is referenced to 0.775 Vrms.
* DA converters are 24-bit, 128-times oversampling.
Digital Input/Output Characteristics
Terminal
IN
EtherSound
OUT
*1. Use a RJ-45 connector compliant with Neutrik EtherCon
* Use a CAT5e STP (Shielded Twisted Pair) cable compliant with EtherSound.
* Use electrically conductive tape to securely connect the metal part of the connector with the shielded part of the cable in order to prevent
electromagnetic interference.
* An EtherSound certified cable is recommended. Maximum length available depends on each cable specification.
Control I/O Characteristics
Terminal Format
NETWORK IEE802.3
* A CAT5e STP (Shielded Twisted Pair) cable is recommended. Maximum length is 100 m.
4
65 W
480 x 350 x 132 mm (W x D x H)
8 kg
Operation free-air : ±0 °C to +40 °C
Storage : -20 °C to +60 °C
250 cm
Owner's Manual, AC Cable
Actual Load
For Use With Nominal
Impedance
50–600 Ω Mics &
3 kΩ
600 Ω Lines
For Use With Max. Output Level
Nominal Select SW
+24 dB (default)
600 Ω Lines
+18 dB
Format Data Length
EtherSound 24bit
®
Level Connector
10 Base-T/
RJ-45
100 Base-TX
Input Level
Nominal
-62 dBu
(0.616 mV)
+10 dBu (2.45 V)
Output Level
Nominal
+4 dBu (1.23 V)
-2 dBu (616 mV)
Level Audio
8 ch Input/
100 Base-TX
16 ch Output
Connector
Max. before clip
-42 dBu (6.16 mV)
XLR-3-31 type
(Balanced)*
+30 dBu (24.5 V)
Connector
Max. before clip
+24 dBu (12.3 V)
XLR-3-32 type
+18 dBu (6.16 V) (Balanced)*
Connector
1
RJ-45*
1
1