[:Source[<N>]]:Voltage[:Level][:Immediate]:Offset; [:Source[<N>]]:Pulse:dcycle - Rigol DS7034 User Programming Manual

Chapter 2 Command System
[:SOURce[<n>]]:VOLTage[:LEVel][:IMMediate]:OFFSet
Syntax
[:SOURce[<n>]]:VOLTage[:LEVel] [:IMMediate]:OFFSet <offset>
[:SOURce[<n>]]:VOLTage[:LEVel] [:IMMediate]:OFFSet?
Description Sets or query the DC offset of the signal output from the specified function/arbitrary
waveform generator channel. By default, the unit is V
Parameter Name
[<n>]
<offset>
Remarks
Send the

impedance.
Send the

set the current amplitude.
Return The query returns the DC offset in scientific notation.
Format
Example
:VOLTage:OFFSet 0.5
:VOLTage:OFFSet?
[:SOURce[<n>]]:PULSe:DCYCle
Syntax
[:SOURce[<n>]]:PULSe:DCYCle <percent>
[:SOURce[<n>]]:PULSe:DCYCle?
Description Sets or queries the duty cycle of the pulse output from the specified function/arbitrary
waveform generator channel, i.g. the ratio of high level to a pulse period.
Parameter
Name
[<n>]
<percent>
Remarks
Duty cycle is defined as the percentage that the high level takes up in the whole pulse
period.
MSO7000/DS7000 Programming Guide
Type Range
Discrete {1|2}
Related to the current
input impedance and
amplitude
HighZ: (-2.5V +
current amplitude/2) to
Real
(2.5V - current
amplitude/2)
50Ω: (-1.25V + current
amplitude/2) to (1.25V
- current amplitude/2)
[:SOURce[<n>]]:OUTPut[<n>]:IMPedance
[:SOURce[<n>]]:VOLTage[:LEVel][:IMMediate][:AMPLitude]
/*Sets the DC offset of GI to 500 mV
/*The query returns 5.0000000E-1.*/
Type Range
Discrete {1|2}
Real 10 to 90
Duty Cycle=t/T*100%
t
T
.
DC
Default
When omitted, by default, the
operations are carried out on GI.
0 V
DC
command to set the input
command to
.*/
DC
Default
When omitted, by default, the
operations are carried out on GI.
20
RIGOL
2-141