[:Source[<N>]]:Voltage[:Level][:Immediate]:Offset; [:Source[<N>]]:Pulse:dcycle - Rigol DS1000Z Series Programming Manual

Chapter 2 Command System
[:SOURce[<n>]]:VOLTage[:LEVel][:IMMediate]:OFFSet
Syntax
[:SOURce[<n>]]:VOLTage[:LEVel] [:IMMediate]:OFFSet <offset>
[:SOURce[<n>]]:VOLTage[:LEVel] [:IMMediate]:OFFSet?
Description
Set or query the DC offset of the specified source channel. The default unit is V.
Parameter
Name
[<n>]
<offset>
Explanation

output impedance.

command to set the output amplitude.
Return
The query returns the DC offset in scientific notation, such as 1.0000000e+00.
Format
Example
:VOLTage:OFFSet 0.5
[:SOURce[<n>]]:PULSe:DCYCle
Syntax [:SOURce[<n>]]:PULSe:DCYCle <percent>
[:SOURce[<n>]]:PULSe:DCYCle?
Description Set or query the pulse duty cycle (the percentage that the high level takes up in the whole
period) of the specified source channel. The default unit is %.
Parameter
Name
[<n>]
<percent>
Return The query returns the duty cycle in scientific notation, such as 5.000000e+01.
Format
Example :PULSe:DCYCle 50
Related
[:SOURce[<n>]]:FUNCtion[:SHAPe]
Command
DS1000Z Programming Guide
Type Range
Discrete {1|2}
Related to the output impedance
and amplitude:
Real
HighZ: ±(2.5V-current amplitude/2)
50Ω: ±(1.25V-current amplitude/2)
You can use the [:SOURce[<n>]]:OUTPut[<n>]:IMPedance
You can use the [:SOURce[<n>]]:VOLTage[:LEVel][:IMMediate][:AMPLitude]
Type Range
Discrete {1|2}
Real 10 to 90
Default
If omitted, the operation
is performed on source 1
by default
0V
command to set the
Default
If omitted, the operation is
performed on source 1 by
default
20
RIGOL
2-71