Contents By Purpose - Kenwood NX-240 Function Reference

CONTENTS BY PURPOSE

Basic Configura-
tions for Using the
Transceiver
Transmission/
Reception
FUNC (K)/Ver 1.20
Configuring Various Functions for the
Transceiver
Frequencies and signaling for transmission and
reception, channel data including the transmit
power, and other functions required for various
communications such as an Individual Call or a
Group Call can be configured by using
KPG-169D/ KPG-170D/ KPG-175D/
KPG-175DN.
2 GETTING STARTED
Writing the Configuration Data to the
Transceiver
The data configured by using KPG-169D/
KPG-170D/ KPG-175D/ KPG-175DN can be
written to the transceiver. Writing the data
configured by using KPG-169D/ KPG-170D/
KPG-175D/ KPG-175DN to the transceiver
allows the transceiver to work according to the
configuration data.
2.1 Connecting the Transceiver to a PC
2.2 Writing the Configuration Data to the
Transceiver
Changing Transmit Power
The transmission power of the transceiver can be
changed to high power, mid power (Mobile only),
or low power.
4.2 Transmission Power
Restricting the Duration of
Continuous Transmission
Setting the available duration of continuous
transmission prevents the transceiver from
occupying the frequency.
Restricting the Continuous Transmission
Duration (Time-out Timer)
NXDN Conventional
Analog Conventional
Using Function Keys
Pressing a key to which a function is assigned
activates the assigned function.
3.3 Using Function Keys
Assigning Functions to the Keys on
the Transceiver
Various functions can be assigned to the PF keys
on the transceiver.
3.3 Using Function Keys
Page 4
Reading the Configuration Data from
the Transceiver
The configuration data in the transceiver can be
read into KPG-169D/ KPG-170D/ KPG-175D/
KPG-175DN. By reading the configuration data
written in the transceiver into KPG-169D/
KPG-170D/ KPG-175D/ KPG-175DN, the
configuration data can be changed or written to
another transceiver.
2.1 Connecting the Transceiver to a PC
Page 4
2.3 Reading the Configuration Data from the
Transceiver
Page 6
Changing the Input Sensitivity of the
Microphone
The input sensitivity of the microphone can be
changed.
Input Sensitivity of the Microphone
Page 17
(Microphone Sensitivity)
Checking If the Transceiver Receives
a Call
The transceiver can search whether the
transceiver is receiving a call from another party.
16 SCAN
Page 50
Page 89
Lighting the LED When Receiving a
Call
The LED can be configured to blink orange or
blue when the transceiver receives a call with
signaling such as DTMF, 2-tone, FleetSync, or
NXDN.
5.3 Selective Call Alert LED
Page 10
CONTENTS
Page 10
Page 4
Page 7
Page 15
Page 172
Page 19
INDEX xx