INSTALLING GRABCAD PRINT
Install the GrabCAD Print software on a facility workstation. Navigate to
http://help.grabcad.com/article/197-
sign-up-download-and-install
and follow the on-screen instructions.
CONNECTING TO THE F123 SERIES PRINTER
Add the F123 Series printer to the GrabCAD Print application. Navigate to
http://help.grabcad.com/article/198-
connect-your-printers
and follow the on-screen instructions.
SETTING THE PRINTER'S DATE AND TIME
In order to ensure accurate build times, the printer's clock must be set correctly. If you find that your printer's
date and/or time are incorrect you can update them using GrabCAD Print. To do so, navigate to
http://help.grabcad.com/article/196-printer-firmware-management
and follow the procedure for "Changing your
printer's clock time".
UPDATING THE CONTROLLER SOFTWARE VERSION
Update the Controller Software if necessary. See
"Updating Controller Software" on page
158.
ADJUSTING THE TIP WIPE HEIGHT
If necessary, adjust the tip wipe height. See
"Tip Wipe Height Adjustment" on page
157.
19