Table of Contents
Advertisement
Diagnostics
config
dhcpserver
firmware
location
modem
netmon
network
openvpn
portal
remote
restart
serial
sms
speed
stat
user
wol
(config)> system log event
b. Depending on the event category, you can enable or disable informational events, status
events, and error events. Some categories also allow you to set the status interval, which
is the time interval between periodic status events. For example, to configure DHCP server
logging:
i. Use the question mark (?) to determine what events are available for DHCP server
logging configuration:
(config)> system log event dhcpserver ?
...
DHCP server: Settings for DHCP server events. Informational events
are generated
when a lease is obtained or released. Status events report the
current list of
leases.
--------------
events
(config)> system log event dhcpserver
ii. To disable informational messages for the DHCP server:
(config)> system log event dhcpserver info false
(config)>
IX10 User Guide
Parameters
-----------------------------------------------------------------
info
status
status_interval
Configure options for the event and system logs
Configuration
DHCP server
Firmware
Location
Modem
Active recovery
Network interfaces
OpenVPN
Captive portal
Remote control
Restart
Serial
SMS commands
Speed
Network statistics
User
Wake-On-LAN
Current Value
true
Enable informational
true
Enable status events
30m
Status interval
898
Advertisement
Table of Contents
