Digi IX10 User Manual page 281

Routing
4. Set the interface for the Dynamic DNS instance:
a. Use the ? to determine available interfaces:
b. Set the interface. For example:
(config network ddns new_ddns_instance)> interface eth1
(config network ddns new_ddns_instance)>
5. Set the Dynamic DNS provider service:
a. Use the ? to determine available services:
(config network ddns new_ddns_instance)> service ?
Service: The provider of the dynamic DNS service.
Format:
custom
3322.org
changeip.com
ddns.com.br
dnsdynamic.org
...
Default value: custom
Current value: custom
(config network ddns new_ddns_instance)> service
b. Set the service:
(config network ddns new_ddns_instance)> service service_name
(config network ddns new_ddns_instance)>
6. If custom is configured for service, set the custom URL that should be used to update the IP
address with the Dynamic DNS provider:
(config network ddns new_ddns_instance)> custom url
(config network ddns new_ddns_instance)>
7. Set the domain name that is linked to the interface's IP address:
(config network ddns new_ddns_instance)> domain domain_name
(config network ddns new_ddns_instance)>
8. Set the username to authenticate with the Dynamic DNS provider:
(config network ddns new_ddns_instance)> username name
(config network ddns new_ddns_instance)>
9. Set the password to authenticate with the Dynamic DNS provider:
(config network ddns new_ddns_instance)> password pwd
(config network ddns new_ddns_instance)>
IX10 User Guide
Dynamic DNS
281