Digi IX10 User Manual page 266

Hide thumbs Also See for IX10:

Table of Contents

9. Click Apply to save the configuration and apply the change.

Command line

1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX10

local command line as a user with full Admin access rights.

Depending on your device configuration, you may be presented with an Access selection

menu. Type admin to access the Admin CLI.

2. At the command line, type config to enter configuration mode:

3. Create the route policy:

a. Add a new routing policy:

(config)> add network route policy end

(config network route policy 0)>

IX10 User Guide