Digi IX10 User Manual page 284

Routing
See Configure VRRP+
network probing to monitor connections through VRRP-enabled devices and dynamically change the
VRRP priorty of devices based on the status of their network connectivity.

Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > VRRP.
IX10 User Guide
for information about configuring VRRP+, an extension to VRRP that uses
Use Digi Remote Manager to view and manage your
Virtual Router Redundancy Protocol (VRRP)
284