Digi IX10 User Manual page 387

Virtual Private Networks (VPN)
c. Click OpenVPN access to enable OpenVPN access rights for users of this group.
d. Click to expand the OpenVPN node.
e. Click  to add a tunnel.
f. For Tunnel, select an OpenVPN tunnel to which users of this group will have access.
g. Repeat to add additional OpenVPN tunnels.
4. Add an OpenVPN authentication user:
a. Click Authentication > Users.
b. For Add, type a name for the user (for example, OpenVPN_User) and click .
c. Type a password for the user.
This password is used for local authentication of the user. You can also configure the user
to use RADIUS or TACACS+ authentication by configuring authentication methods. See
User authentication methods
IX10 User Guide
for information.
OpenVPN
387