Table of Contents
Advertisement
System administration
198000
n
396000
n
528000
n
792000
n
The default is 792000.
5. Set leds_enabled to false to disable all LEDs on the device except for the Power LED, which
will remain lit green, indicating that the device has power:
(config)> system power leds_enabled false
(config)>
If disabled, one or more LEDs will flash periodically to indicate that the device is still active.
6. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
7. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
IX10 User Guide
Configure a power profile
832
Advertisement
Table of Contents
