Table of Contents
Advertisement
Services
3. Click Services > Web administration > Access Control List > Zones.
4. For Add Zone, click .
5. Select External.
6. Click Apply to save the configuration and apply the change.
Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX10
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the command line, type config to enter configuration mode:
> config
(config)>
3. Add the external zone to the web administration service:
(config)> add service web_admin acl zone end external
(config)>
IX10 User Guide
Allow remote access for web administration and SSH
475
Advertisement
Table of Contents
